Your trusted local team — same-day available across 9+ cities.
Get a Free QuoteStandard tubs, freestanding soakers, walk-in tubs, whirlpools. Licensed plumbing connections, proper waterproofing, level install — ready for years of use.
A standard cast-iron tub weighs 300+ lbs. A whirlpool can be 500+. Getting them in and out of an existing bathroom — without damaging floors, walls, or doorframes — takes real skill.
Drain reconfiguration, supply line work, overflow connection — all done by our licensed plumber, not handymen with wrenches. Code compliant, leak tested before tile.
Removing a cast-iron tub often means breaking it up in place (no doorway in the world fits a whole one out). We bring sledgehammers, drop cloths, and a hauling plan. Cast iron disposed at metal recycling.
Heavy tubs are set on a mortar bed to prevent flex and crack the surround tile later. We mix and level the mortar, then set the tub before it dries. Done right, the tub never moves.
Tub-to-wall and tub-to-floor seams sealed with proper waterproof membrane (not just caulk). This is the #1 cause of bathroom water damage.
After tub install, we coordinate the tub surround (tile, acrylic walls, prefab) so everything fits. Bundle tub + surround for cleanest result.
Walk-in tubs for aging-in-place: door seal pressure-tested, slip-resistant floor, grab bar reinforcement, faster-drain valve. Quoted custom — major bathroom modification.
From standard alcove replacements to luxury freestanding soakers.
3-wall built-in tub — the most common type. Like-for-like replacement keeps existing plumbing locations. $2,400-$3,800 install + tub.
Beautiful standalone tubs (oval, slipper, modern rectangle). Higher install cost due to floor reinforcement and plumbing routing. $3,500-$6,000+.
Side-door tubs for safety + accessibility. Pressure-sealed doors, lower step-in, slip floor. $8,000-$15,000 typical including unit.
Jacuzzi-style with massaging jets. Requires dedicated electrical for motor. Heavier — need floor capacity check. $3,500-$7,000+.
Tub set into a custom deck/surround. Common in master bathroom renos. Quoted as part of larger bathroom project.
Removing the tub entirely to build a walk-in shower. See our shower page. ~$3,500-$7,000 typical.
Recent bathtub install and replacement jobs across the GTA.
Old cast iron tub broken up in place, hauled out. New 60" acrylic alcove tub set on mortar bed, plumbing reconnected, walls prepped for tile. 2 days.
Removed old drop-in, framed new floor support, ran new plumbing for freestanding tub (floor-mounted faucet). Customer-supplied $3K tub. 2 days.
Aging-in-place upgrade. Removed standard tub, modified plumbing for lower drain, installed Safe Step walk-in. Pressure tested, slip floor verified. 3 days.
Replaced 15-year-old jet tub with new whirlpool. Electrical: existing dedicated 240V circuit reused, GFCI added. Floor checked — reinforcement not needed. 2 days.
Master ensuite renovation. New drop-in tub on custom-built deck, tile surround coordinated. Plumbing rough-in done before tile. 4 days (full bath project).
Old tub removed, sub-floor water damage discovered, joists reinforced and new sub-floor installed. Customer pivoted to walk-in shower (separate quote).
Real, anonymized examples. Send your project details for a free quote.
Bathtub installation pricing varies by tub type and complexity. Free in-home assessment with detailed scope and written quote.
Alcove or standard tub, like-for-like swap. 1-2 days.
Floor-mounted faucet, repositioned plumbing, framing if needed. 2-3 days.
Accessibility tubs with door seals, slip floor, lower drain. 3 days.
For the full pricing breakdown across 40+ services see our 2026 pricing guide.
Real projects from our portfolio — updated automatically.
Free in-home assessment, scope discussion, and written quote with realistic timeline.