Your trusted local team — same-day available across 9+ cities.
Get a Free QuoteCustom tile showers, prefab shower kits, walk-in conversions, glass enclosures, body sprays. Waterproofing done right, licensed plumbing connections, ready for years.
Shower leaks don’t announce themselves — they rot studs and ruin ceilings before you ever see water. Proper waterproofing is the invisible difference between a 5-year shower and a 25-year shower.
Schluter Kerdi sheet membrane or RedGard liquid membrane over cement board substrate. Then tile on top. This is the only correct method — greenboard or just thinset is not waterproof.
Shower floor must slope 1/4" per foot toward the drain. Mud-bed construction or pre-sloped Schluter pan. Improperly sloped showers pool water at the wall — eventually leaks through grout.
Mixing valve installed with proper hot/cold orientation, anti-scald protection (code-required), and shut-off access. Done by our licensed plumber, not by handymen with YouTube training.
Properly built shower curb prevents water spilling onto bathroom floor. We use foam curb forms (Wedi/Kerdi) with membrane wrap — no chance of curb-base water intrusion.
Recessed shampoo niches sloped for drainage. Built-in benches fully waterproofed before tile. These are the spots that fail first if not done correctly.
Modified thinset for porcelain, unmodified for stone (no surprises about which mortar). Proper backer-rod expansion joints in long runs. Caulk — not grout — in all inside corners.
From budget prefab kits to fully custom tile showers.
Full custom-tiled shower — walls, floor, niches, bench. Schluter waterproofing, sloped pan, glass enclosure. $5,000-$12,000 depending on size + tile. Most-requested high-end.
Acrylic or fibreglass one-piece or 3-piece kits (Sterling, Aqua, MAAX). Faster install (1-2 days), more budget-friendly. $1,800-$3,500 labour + kit.
Remove old bathtub, build walk-in shower in same footprint. Popular for aging-in-place or modernizing. $3,500-$7,000.
Frameless glass shower doors and panels — standard 3/8" tempered. Custom measured + fabricated. $1,400-$3,200 typical for standard enclosure.
Multi-head shower systems: rain shower head + body sprays + hand-held wand. Requires upsized plumbing supply lines for proper flow.
Steam generator + dedicated sealed enclosure + ceiling slope + tile-over-membrane. Higher complexity, custom quoted. $8,000-$15,000+.
Recent shower installs and renovations across the GTA.
5x3 master shower. Schluter waterproofing, large-format porcelain tile, recessed niche with stone, glass enclosure. 8 days, multi-trade.
Removed old steel bathtub, built walk-in shower in same footprint. Tile floor and walls, glass panel. Plumbing reconfigured. 6 days.
Demo old shower, install new acrylic 3-piece kit (Sterling Ensemble). New valve, new drain, glass sliding doors. 2 days.
Existing tile shower converted to steam: sealed glass enclosure, sloped ceiling, steam generator install + dedicated electrical, new vapour-proof lighting.
Existing tile shower with old shower curtain replaced with frameless 3/8" glass enclosure with pivot door. Custom measured + fabricated. 1 day install.
Recurring leak through ceiling below. Diagnosed failed corner seam in shower. Cut tile, replaced corner waterproofing, re-tiled, regrouted, re-caulked. Licensed plumber checked valve. 3 days.
Real, anonymized examples. Send your project details for a free quote.
Shower installations are project-quoted after an in-home assessment. Variables include size, tile choice, glass type, and complexity. Free assessment included.
Acrylic or fibreglass kits with glass doors. 2-3 days. Customer supplies kit.
Full custom build with Schluter waterproofing, tile, niche, glass. 6-10 days. Most-popular.
Remove tub, build walk-in. Most-requested aging-in-place upgrade.
For the full pricing breakdown across 40+ services see our 2026 pricing guide.
Real projects from our portfolio — updated automatically.
In-home assessment, design discussion, and written quote with realistic timeline. Most quotes ready in 2-3 days after consultation.